English
عربى
The voltage in Sweden and the Netherlands is 230V. The Dutch power plug is a two-pole non-grounding plug bracket. The Netherlands uses a German socket. Europe has been unified. In most areas, a unified standard should be used. Europe is 205V/16A. Specifications: round feet. The plugs in Sweden are the same as those in Norway, Finland, and Denmark in Northern Europe. They are all European standard (German standard) plugs. Domestic double round pins and double flat pins can be used without conversion plugs. The connectors are generally divided into plugs and Socket halves.
The plug generally refers to the unfixed half. A plug with a positive contact body is called a male plug; a plug with a female contact body is called a female plug. The socket generally refers to the half that is fixed (on the panel or chassis). A socket with a positive contact body is called a male socket; a socket with a female contact body is called a female socket.
When the two halves of the connector have no fixed and unfixed distinction (such as cable connectors), they can be distinguished according to the form of the contact body. The plug with a positive contact body can be called a plug, and the one with a negative contact body can be called a socket.
When the two halves of the connector have no distinction between fixed and non-fixed, and there is no distinction between male and female in the contact body, the two halves of the connector are not divided into plugs and sockets.
Four eyes: three-phase, three-fire, one-zero, three-eye: live wire, ground wire, neutral wire Two-eye: live wire, ground wire Left zero (N) right fire (L) ground middle (PE)
For power products, there are usually four nouns: 1. Plug. Refers to the part that is connected to the power cord and has a male pin. The full name should be called a plug connector. For two-pin flat plugs, English is sometimes spelled as. 2. Connector. Refers to the part that is connected to the power cord and has a female jack socket. 3. Appliance input socket. Its state is similar to 1, but it is installed on a fixed body such as an electrical appliance and is not connected, including the one installed on the socket body. 4, socket. Its status is similar to 2, but the installation location is the same as 3. The full name should be called Appliance Socket.
I hope this content is helpful to you. We are a professional Danish Standard Power Cord Factory. If you want to know more professional information, please continue to pay attention to us.
